What size juice label fits 2 oz wellness shots, 12 oz and 16 oz bottles?

How do I size labels for 8 oz, 12 oz and 16 oz square French PET bottles?

The four-sided clear PET French square bottle (with a 38 mm tamper-evident ratchet cap) is the workhorse of cold-pressed juice bars and cleanse programs because it packs tightly into refrigerated delivery boxes and gives you four flat windows to display the drink color. Each of the four vertical faces is framed by beveled 45-degree corners at the left and right edges, a sloped shoulder at the top, and a recessed heel ring at the bottom. If you want the minimalist juice-bar look where two side faces stay completely bare, order a vertical front label (for your logo, flavor number and ingredient stack) and a matching vertical back label (for nutrition facts, ingredients and barcode) sized ¼ inch narrower than the flat face width. If you prefer one continuous band that wraps around the bottle in a single pass, measure across all four faces and the beveled corners, then subtract ¼ inch so the ends do not overlap when you order your juice bottle labels.

1. 8 oz square French PET bottle: 1.75 × 2.75 in single face (or 7 × 2.75 in 4-face wrap).
2. 12 oz square French PET bottle: 2 × 3.5 in single face, 6 × 3.5 in 3-face U-wrap, or 8 × 3.5 in 4-face wrap.
3. 16 oz square French PET bottle: 2.25 × 4 in single face, 6.75 × 4 in 3-face U-wrap, or 9 × 4 in 4-face wrap.
4. Test on a filled bottle: cold liquid pressure bows thin PET walls outward slightly, adding up to 1/16 in per side.

What are the standard juice label sizes by bottle and shot size?

Use the benchmark chart below to compare single-face panels and full wraps across 2 oz wellness shots, 8–16 oz square French bottles, 12–16 oz cylindrical round bottles, 32–64 oz family jugs, and 38 mm tamper caps. Remember that in label printing, horizontal width around the bottle is always written first and vertical height from top to bottom is written second (W × H in inches). Because CubitPack cuts every order to your exact dimensions with zero die or plate charges, you never have to force a 12 oz bottle design onto a stock office template. If your blow-molded PET supplier has a slightly taller shoulder taper that requires a 2 × 3.25 inch panel, we cut that exact size.

How do I size wrap labels for 2 oz ginger and immunity shot bottles?

Two-ounce (60 mL) ginger, turmeric, wheatgrass and elderberry wellness shots are one of the highest-margin items in a cold-pressed juice case, but their tiny cylinder leaves zero room for sizing guesswork. Most 2 oz PET and glass shot bottles measure 1.35 to 1.5 inches in diameter (giving a circumference of 4.25 to 4.7 inches) with a straight vertical body wall of only 1.875 to 2 inches. A 4.25 × 1.75 inch (or 4 × 1.75 inch on narrower 1.35 in vials) full-wrap rectangle fits neatly between the bottom heel and upper neck shoulder while leaving a ¼ inch gap at the back seam. Because the bottle is so narrow, keep your main front brand face to 1.35 inches wide in the center, place your Supplement or Nutrition Facts on the right wing, and rotate your UPC barcode 90 degrees vertically (ladder style) so checkout scanners can read the bars flat up the wall. You can also explore general bottle layouts on our custom bottle labels page.

How do I measure cylindrical round juice bottles and glass carafes?

Cylindrical PET bottles, 12 oz and 16 oz glass Boston rounds, and wide-mouth glass lemonade carafes are measured using standard cylinder geometry. Stand the bottle on a flat counter and place a rigid ruler against the side wall to find the straight vertical section that does not curve inward toward the neck or base. Subtract ¼ inch from that straight height to get your label height. Next, measure the diameter across the bottom of the bottle (or wrap a flexible tailor's tape around the body for the circumference). For a full wrap, multiply the diameter by 3.14 (π) and subtract ¼ inch so the ends never overlap. On tapered glass carafes where the neck widens smoothly into the body, avoid tall full wraps that will pucker on the taper; instead, use a shorter 2 to 2.5 inch tall horizontal band or a classic front oval from our custom oval labels range.

What size label fits 38 mm bottle caps and tamper-evident neck seals?

Almost every 8 oz, 12 oz and 16 oz cold-pressed PET bottle uses a standard 38 mm ratchet-ring tamper cap (measuring 1.5 inches across the outside diameter, with a slightly recessed flat inner circle on top). Placing a 1.25 inch round sticker from our custom circle labels on top of that 38 mm cap is the standard way juice bars number a 6-bottle daily cleanse (1 through 6) or mark seasonal batch dates when bottles sit upright in deep open-top grab-and-go coolers. If you bottle into glass carafes or smooth-twist caps that do not have a breakaway plastic ratchet ring, you can add tamper evidence by ordering a one-piece lollipop seal (a 1.25 inch top circle attached to a 0.5 × 1.5 inch side strip) or a vertical security strip that bridges across the cap seam onto the glass neck.

1. 38 mm standard PET juice cap: 1.25 in circle fits cleanly inside the top rim ridge.
2. 28 mm shot vial cap: 0.75 in or 0.875 in circle fits the top of 2 oz wellness shots.
3. 48 mm wide glass carafe lug cap: 1.5 in circle or lollipop tamper strip.
4. Cleanse kit efficiency: use one shared body label dieline and numbered 1.25 in cap circles on sheets.

What are the most common juice bottle label sizing mistakes?

Cold-pressed PET bottles flex under liquid weight and curve sharply at the shoulder. Check these five sizing details before approving your proof

1. Measuring up onto the sloped shoulder taper of a square French PET bottle, causing the top edge of the label to lift and bubble.
2. Sizing a 4-face square bottle wrap on an empty bottle without accounting for the outward bow once filled with cold juice.
3. Writing a 2 oz shot wrap as 1.75 × 4.25 in instead of 4.25 × 1.75 in (W × H), which rotates the label 90 degrees on the roll.
4. Placing a horizontal barcode around a narrow 1.35 in diameter 2 oz shot bottle instead of rotating it vertically like a ladder.
5. Ordering a 1.5 inch circle for a 38 mm cap, which rides up onto the rounded outer grip ribs instead of sitting in the flat 1.25 in center.

Find your label size

Packaging for this

Custom Juice Labels

Custom Bottle Labels

Custom Clear Labels

Custom Circle Labels

Custom Juice Boxes

Custom Water Bottle Labels

More guides