- Custom roll labels arrive wound single-file on a cardboard core with the surrounding waste matrix removed so each label pops off the liner cleanly.
- Built for high-speed hand application, manual tabletop pull dispensers, semi-automatic bottle rollers and inline rotary labeling machines.
- CubitPack prints custom roll labels from 500 pieces in 10-14 business days, with 4-5 business day rush production available.
- Design help, custom cutting dies, printing plates and shipping to all 50 US states are free, and you approve a digital proof and 3D mockup before payment.
Custom Roll Labels
Custom roll labels are kiss-cut adhesive labels wound single-file around a sturdy cardboard core with all waste matrix stripped away for fast peeling by hand, tabletop dispensers or automatic labeling machines. Order circles, rectangles, ovals or custom contours from 500 labels, produced in 10-14 business days (rush in 4-5) with free design help, zero die fees and free US shipping.
What are custom roll labels?
Custom roll labels are pressure-sensitive adhesive labels kiss-cut to your exact shape and wound in a single continuous lane around a rigid cardboard core. During finishing, the excess face stock around your cut line (called the waste matrix) is stripped away, leaving only your finished labels spaced evenly along a siliconized release liner. When the liner is pulled over a sharp edge (by your fingers, a tabletop dispenser bar or the peel plate of an automatic labeling machine), the stiff label releases forward onto your jar, bottle, can, pouch or carton in one smooth motion. You choose the shape, roll width, vertical repeat height, unwind direction and finish. At CubitPack, custom roll labels start at 500 pieces and take 10-14 business days (or 4-5 days with rush), with guaranteed Pantone matching, free design help, zero die charges and free US shipping.
Roll labels facts
- Minimum
- 500 labels
- Turnaround
- 10-14 business days
- Rush
- 4-5 days, quoted
- Format
- Single-file on cores, waste matrix stripped
- Shapes
- Rectangle, circle, square, oval, custom contour
- Printing
- Full color (CMYK), Pantone
- Finishes
- Matte, gloss, foil stamping, spot UV
- Core & unwind
- Hand or machine unwind
- Shipping
- Free to all 50 states
Which custom roll label setup fits my application method?
| Roll configuration | How labels are dispensed | Best container & run size | Key specification |
|---|---|---|---|
| Hand-peel & bench dispenser rolls | Pulled by hand or through a tabletop separator bar | 500 to 2,500 pouches, boxes, lids or jars packed at a table | Any unwind direction works; compact roll diameter for easy handling |
| Semi-automatic roller applicator rolls | Foot-pedal or lever bottle roller feeds one wrap per cylinder | 1,000 to 10,000 round dropper bottles, wine bottles or candle jars | Matched core diameter and Position 1 to 4 wind-out copy orientation |
| High-speed inline machine rolls | Optical gap sensor triggers motorized peel-plate application | 5,000+ beverage cans, supplement bottles, sauces and cosmetics | Exact core size, max outer roll diameter and ⅛ in sensor gap |
| Clear roll labels | Transparent stock wound on a liner for hand or optical-sensor lines | Glass jars, beverage bottles and serums needing a no-label look | Specify if machine uses ultrasonic or black eye-mark gap sensor |
| Foil & stamped roll labels | Metallic foil base or hot-stamped accents wound single-file | Spirits, luxury skincare, candles and limited-edition roasts | Adds bright metallic shelf reflection at full roll dispensing speed |
Not sure which format fits?
Request a Quote →What size custom roll label do I need?
Every roll label is cut to your exact width × height in inches with zero die fees. On a roll, specify which dimension feeds off the roll first (copy direction) if you use a labeling machine. For round containers, full-wrap width equals π (3.14) × diameter minus a ¼ inch gap. Whether you are comparing printed labels on rolls, custom labels on a roll, machine applicator roll labels, dispenser roll stickers or custom die-cut roll labels, we size the template to your exact container.
| Label size (W × H) | Shape | Common containers | Best format |
|---|---|---|---|
| 1.5 × 1.5 in or 2 × 2 in | Circle or square | Jar lids, tamper seals, coffee valves, mailer box closures | Roll for bench dispenser |
| 1.75 × 3.75 in | Rectangle wrap | 1 oz (30 ml) dropper bottles, essential oils, lip balm tubes | Roll (right- or left-edge leading) |
| 2.25 × 4 in | Rectangle or oval | 4 oz to 8 oz cosmetic pump bottles, hot sauce bottles, spice jars | Roll for bottle applicator |
| 2.5 × 7.5 in | Full wrap rectangle | 8 oz mason jars, 12 oz glass beverage bottles, supplement packers | Roll for rotary or inline machine |
| 3 × 4 in or 3.5 × 5 in | Rectangle | 12 oz coffee bags, stand-up pouches, 12 oz and 16 oz aluminum cans | Roll for flat-tamp or can roller |
Suggested label size: 9⅛ × 2¾ in (width × height)
A typical starting point. Your account manager confirms the size on the proof.
Quote this size →Have your inside dimensions ready? Request pricing across up to 3 quantities.
Request a Quote →How do I choose roll labels?
- Confirm hand vs machine applicationHand peeling or manual bench dispensers work with any unwind; motorized applicators require your exact core size and unwind number.
- Measure straight wall height and wrap widthMeasure only the straight vertical wall of a bottle or jar and leave a ¼ inch gap between full-wrap ends.
- Pick your unwind direction (Positions 1 to 8)Unwind numbers specify whether labels face outward (Positions 1 to 4) or inward (Positions 5 to 8) and which edge leads first.
- Choose clear, foil or standard label stockTell us if your containers face wet bottling lines, ice buckets, showers or oils so we match the right stock.
- Select matte, gloss, foil stamping or spot UVMatte keeps small barcode and ingredient text glare-free, gloss deepens dark colors, and foil or spot UV highlights logos.
- Combine multiple SKUs of the same sizeIf you bottle several flavors or scents that share the same label size, combine them on one quote to lower unit cost.
What are roll labels made of?
Which finishes can roll labels have?
Which custom roll label shapes and companion pages fit my container?
Roll labels specifications
| Spec | Options |
|---|---|
| Roll format | Single-file kiss-cut labels on a continuous release liner with waste matrix stripped |
| Shapes | Rectangle, circle, square, oval, custom contour dieline (no die charges) |
| Materials | Clear, foil; white paper, white BOPP film and kraft stocks |
| Printing | Full color (CMYK), Pantone color matching guaranteed |
| Finishes & extras | Matte, gloss, foil stamping, spot UV |
| Core diameter & OD | Machine or hand-applied rolls custom wound to your dispenser or applicator setup |
| Unwind directions | Machine or hand-applied rolls custom wound to your dispenser or applicator setup |
| Adhesive options | Paper, vinyl, clear, kraft or foil stocks with adhesive matched to your container and storage conditions |
| Minimum order | From 500 labels (smaller trial runs considered case by case); delivered within ±5% |
| Proofs & samples | Free digital proof and 3D mockup before payment; $50 sample kit or paid sample credited to order |
| Turnaround & shipping | 10-14 business days (rush 4-5 days); free shipping to all 50 US states, worldwide DDP available |
Ready to quote your roll labels? Compare up to 3 quantities with a free 3D mockup.
Request a Quote →Where do brands use custom roll labels?
Once a production run passes a few hundred units, peeling labels off flat sheets slows your packing crew down. Winding your custom labels single-file on a sturdy roll with the surrounding waste matrix stripped away cuts hand-labeling time in half and lets you step directly into tabletop dispensers or motorized applicators as your volume grows.
Roll labels design ideas
Example designs with made-up brands. Your packaging is made to your design.
What are the most common custom roll label mistakes?
Most roll label delays happen when machine specs or container curves are overlooked before going to press. Avoid these five mistakes. When specifying machine applied roll labels, 3 inch core roll labels, 1 inch core dispenser labels, automatic applicator labels and continuous roll product labels, avoid these common production mistakes
- Ordering roll labels for an automatic bottle applicator without checking whether the machine needs Wind Out (Positions 1–4) or Wind In (Positions 5–8).
- Swapping width and height in your quote, which rotates the artwork 90 degrees relative to how the roll feeds through a machine.
- Designing needle-sharp inward points on a custom contour roll label that can snag or tear when the waste matrix is stripped.
- Wrapping a cylinder to 100% of its circumference with zero gap, causing the ends to overlap when glass container diameters vary slightly.
- Forgetting to note cold-fill condensation, oil contact or freezer storage on the quote when picking the face stock and adhesive.
Chat with a designer now
Share your logo, a sketch or an AI image. We'll rebuild every element cleanly onto your label dieline and send a 3D mockup, free.
Made your design with AI?
Generated a concept in Google Gemini, ChatGPT, Claude or Midjourney? Send us your AI image: we rebuild every element onto your label dieline and show you a 3D mockup before you pay, free.Custom roll labels vs flat sheet labels: how do they compare on the packing line?
| Flat office sheets or unstripped sheets | Custom roll labels from CubitPack | |
|---|---|---|
| Peeling & dispensing speed | Fingernail-picking corners off flat office sheets takes 10 to 15 seconds per piece | Stripped matrix on a continuous liner pops each label off a peel bar in 1 to 2 seconds |
| Machine compatibility | Flat sheets cannot feed through bottle rollers or inline applicators | Wound on sturdy cores to your required unwind direction and sensor gap |
| Cut shapes & corner radius | Restricted to pre-punched sheet grids that lift at sharp 90-degree corners | Custom die-cut to any contour or rounded corner radius with zero die fees |
| Print & finish quality | Toner or inkjet ink that smears when touched by damp hands or oils | Commercial CMYK, guaranteed Pantone match, matte, gloss, foil or spot UV |
| Prepress & proofing | Manual mail-merge alignment drifts down the page | Free dieline setup, digital proof and 3D mockup before payment |
Get custom roll labels sized to your product, with a free 3D mockup before you pay.
Request a Quote →Are roll labels safe and sustainable?
FSC paper and ISO 9001 partner facilities
FSC-certified paper stocks, food-safe packaging materials and ISO 9001 production are available on request through our partner facilities. We share certificates on request.Indirect food, beverage and cosmetic labeling
When your roll labels go onto food jars, cold beverage cans or skincare bottles, tell your account manager on the quote so we assign the right facility and stock.Scannable UPC barcodes and sharp micro-text
We check barcode contrast, quiet zones and small ingredient typography on your digital proof before printing so retail scanners read every label on the first pass.How do I order custom roll labels?
Tell us what you need
Size, quantities or AI conceptCompare volume pricing
Dedicated account managerApprove your proof
Digital proof + 3D mockupMade and shipped
Free to all 50 statesHow much do custom roll labels cost?
The price depends on four things, and every custom quote is free.
Label width × height
Square inches per label sets how many pieces fit on the webTotal roll quantity
Unit cost drops sharply at 1,000, 2,500, 5,000 and 10,000+ labelsFace stock (clear, foil or standard)
Clear and metallic foil stocks price higher than standard stocksSpecialty finishes & SKU splits
Foil stamping, spot UV and multiple SKU splits affect the quoteTo reduce your unit cost per roll label, keep the exact same width, height and corner radius across all your flavors or scents so they share one cutting setup, and compare three quantity tiers (such as 1,000, 2,500 and 5,000) in Step 1 of the quote form. You never pay die or plate fees, your first order is 10% off, and we beat any written US competitor quote for identical specs. Buyers ordering custom unwind direction labels, custom printed roll labels, roll labels with logo or printed roll labels can compare up to three quantities in one quote.
10% off your first order.
Request a Quote →What do I need to send for a quote?
- The product and how many you need
- The inside size, or what goes in it
- A style, or ask us to suggest one
- Your logo or artwork (an AI image is fine)
- Pantone codes, if you have them
- Delivery ZIP code and the date you need it
Can I see a sample first?
Sample kit
Board and finish swatches, sample boxes, labels and bags. Credited to your first order.Digital proof + 3D mockup
See it before you payPrinted sample
Of your own designHow does shipping work?
- Free shipping to all 50 states
- Worldwide with DDP prices: duties and taxes included
- Blind and split shipping
- Damaged in transit? We reprint the damaged units free
Why brands choose CubitPack
Dedicated specialist
One account manager from quote to deliveryPantone guaranteed
Clearly off? We reprintReprint or refund
If we get it wrong, you chooseBBB accredited
A US business you can checkRoll labels questions
What is roll unwind direction (Positions 1 to 8) and when does it matter?
Unwind direction (Positions 1–8) shows whether labels sit on the outside of the roll (1–4, wind out) or inside (5–8, wind in) and which edge feeds off first: top (1/5), bottom (2/6), right (3/7) or left (4/8). It only matters for labeling machines.
Which unwind direction should I pick for a bottle or jar labeling machine?
Most wrap-around bottle labelers use Wind Out with the right edge leading (Position 3) or left edge leading (Position 4) so the width wraps around the spinning cylinder. Check your applicator manual and note the unwind number in Step 2.
What core size do custom roll labels come on?
Commercial labeling machines and tabletop dispensers typically use a 3 inch core diameter, while compact desktop dispensers often use a 1 inch core. Note your core size and max outer roll diameter in the quote.
What does 'waste matrix stripped' mean on custom roll labels?
After kiss-cutting your label shape, we peel away all the surrounding scrap face stock (the waste matrix) before winding the roll. Only your finished labels remain on the backing liner so they pop off cleanly when bent.
How much space is left between each label along the roll?
Standard spacing between labels along the liner is typically ⅛ inch (0.125 in), giving optical and ultrasonic gap sensors on automatic labeling machines a clear window to detect where each label starts and stops.
What is the minimum order quantity for custom roll labels?
Our standard minimum is 500 labels, and smaller trial runs can be considered case by case. Enter up to three quantities on your quote to compare volume price breaks.
Can I order custom contour shapes on a roll, or only rectangles and circles?
You can order any custom contour shape on a roll with zero die charges. For machine application, avoid sharp needle points on the leading edge so the tip never catches on the peel plate.
Can I combine multiple flavors or scents into one roll label order?
Yes. Select 2 designs or 3+ designs in Step 2 of the quote form and list the quantity per SKU in the notes. We wind each variety onto its own separate labeled roll.
Are your roll labels waterproof for cold cans, ice buckets and bath products?
We offer clear and foil label stocks along with matte and gloss finishes now, and our full waterproof BOPP film and paper stock list is being confirmed. Note cold-fill or moisture exposure on your quote.
How long do custom roll labels take to print and ship?
Standard turnaround is 10-14 business days after you approve your digital proof and 3D mockup and complete payment. Rush production in 4-5 business days is available, and US shipping is always free.
Still have a question? Ask a packaging specialist.
Request a Quote →Roll labels terms, explained
- Unwind direction
- Industry chart (Positions 1–8) showing which edge of the label feeds off the roll first and whether print faces out or in
- Core diameter
- The inside diameter of the cardboard tube at the center of the roll (commonly 3 in or 1 in)
- Waste matrix
- The excess face stock around kiss-cut labels that is stripped away before the roll is wound
- Peel plate (peel bar)
- The sharp-angled edge on a dispenser or machine over which the backing liner bends to pop the label off
- Eye-mark / sensor gap
- The ⅛ inch gap between labels (or printed black bar on clear liners) that tells a machine where to stop
- Corner radius
- Slightly rounded corners (such as 1/16 in radius) that prevent rectangular roll labels from snagging or dog-earing
More for your label & sticker types packaging
Learn more
Get your roll labels price
One dedicated account manager prepares pricing across up to 3 quantities.
- Free design & AI-to-print studio + 3D mockup
- No die or plate charges · 4–5 day rush available
- Free shipping to all 50 states
- 10% off your first order
- Reprint or refund if we get it wrong
Every CubitPack fact on this page comes from our confirmed offers in our published product specifications (500-label minimum, 10-14 business day turnaround, rush 4-5 days, shapes and finishes) and was checked by a packaging specialist. Unwind orientation (Positions 1–8), core sizing and cylinder wrap formulas follow standard TLMI/FINAT labeling specifications, and every order is verified on a digital proof and 3D mockup before payment. Spot something wrong? Tell us and we will fix it. Tell us if something looks wrong.
Sources
- All CubitPack offers, 500-label minimum, 10-14 business day turnaround (rush 4-5), free design help, no die fees, free US shipping, Pantone guarantee and $50 sample kit
- Standard 1-8 roll unwind orientation chart, peel-plate release mechanics and 1/8 inch sensor gap spacing
- Core diameters (1 in vs 3 in), matrix stripping and automatic vs manual roll dispensing
What changed
- October 22, 2026: First published.
- October 22, 2026: Updated specifications, terminology, and verified source links.