What Are Standard Wardrobe, Dish Pack, and TV Moving Box Sizes and Divider Specs?
Short answer: Specialty moving cartons rely on 48 to 51 ECT BC-flute double-wall corrugated board: Dish Pack barrels measure 18 × 18 × 28 inches (5.2 cu ft) with multi-tier cell dividers, full Wardrobe boxes measure 24 × 20 × 46 inches with a 24-inch steel hanger bar, and telescoping TV cartons adjust from 40 to 72 inches wide.

On this page
- What are the industry dimensions and ECT ratings for specialty moving boxes
- How do double-wall dish pack boxes and cell partition kits protect china and stemware
- How are wardrobe moving boxes and steel hanger bars built for closet transfers
- How do telescoping flat-screen TV and mirror moving boxes adjust to screen width
- How should moving companies bundle and palletize specialty cartons for crews
- Common mistakes
- FAQs
Request a custom quoteFree dieline & 3D mockup
While standard 32 ECT single-wall Small, Medium, and Large cartons handle everyday books, cookware, and linens, high-claim household items, fine china, crystal stemware, hanging suits, and 55-to-75-inch OLED televisions, require double-wall specialty cartons engineered for vertical crush resistance and internal suspension. When relocation fleets and storage brands order custom moving boxes, three specialty structures anchor every crew kit: the 18 × 18 × 28 inch Dish Pack barrel (5.2 cu ft, 48 to 51 ECT BC-flute) paired with interlocking 4 × 4 and 5 × 5 cell partition grids; the 24 × 20 × 46 inch Full Wardrobe carton equipped with a 24-inch galvanized steel hanging bar; and two-piece telescoping flat-screen TV boxes buffered by four foam corner blocks. Ordering custom printed moving cartons through CubitPack includes custom dielines, 10 to 14 business day standard turnaround, zero die or plate charges, and free US freight across all 50 states.
What are the industry dimensions and ECT ratings for specialty moving boxes?
Unlike general household cartons that rely on a single layer of C-flute corrugated medium, specialty relocation cartons must withstand heavy vertical stacking loads inside air-ride moving vans while shielding fragile contents against side-impact punctures. A Dish Pack barrel shares the exact same 18 × 18 inch square base footprint as standard 3.0 cu ft Medium and 4.5 cu ft Large boxes so movers can lock all three carton classes into flush, floor-to-ceiling truck tiers without wasted void space. Use the engineering specification table below to match inside usable dimensions (Length × Width × Depth), board flute combinations, and partition hardware across your commercial moving inventory.
| Specialty Carton Type | Inside Dimensions (L × W × D) | Cubic Volume | Board Spec & Flute | Hardware / Divider System & Max Load |
|---|---|---|---|---|
| Dish Pack / China Barrel | 18 × 18 × 28 in (or 18 × 18 × 27 in) | 5.2 cu ft | 48–51 ECT BC-flute double-wall (DW 275#–350#) | 2- or 3-tier interlocking cell grids (16 or 25 cells) + 17.75 × 17.75 in layer pads; 70–80 lbs max |
| Full Upright Wardrobe Box | 24 × 20 × 46 in (or 24 × 24 × 40 in) | 12.8–13.3 cu ft | 48 ECT BC-flute double-wall (DW 275#) | 24 in galvanized steel hanger bar in die-cut sidewall notches + hinged front access door; 85–100 lbs max |
| Compact / Short Wardrobe Box | 24 × 20 × 34 in | 9.4 cu ft | 44 ECT heavy C-flute or 48 ECT BC-flute | 24 in steel hanger bar for shirts, blazers, and folded trousers; fits low stairwells and SUVs; 65–75 lbs max |
| Telescoping Flat-Screen TV Box | 40–72 × 8 × 40 in (2-piece slide) | 9.0–16.0 cu ft | 48 ECT BC-flute double-wall with full overlap flaps | 4 high-density foam corner blocks + anti-static screen bag for 32 in to 75 in TVs; 85 lbs upright |
| 4-Piece Mirror / Picture Carton | 37 × 4 × 27 in (adjustable 4-panel) | 2.3–4.6 cu ft | 32–44 ECT C-flute single-wall or double-wall | 4 telescoping corner-fit panels for framed art, mirrors, and glass tabletops; 50–65 lbs max |
| Tall Lamp & Golf / Ski Carton | 12 × 12 × 40 in (or 12 × 12 × 48 in) | 3.3–4.0 cu ft | 32–44 ECT C-flute end-loading RSC | Reinforced bottom pad for heavy ceramic or brass lamp bases and tall floor fixtures; 45 lbs max |
How do double-wall dish pack boxes and cell partition kits protect china and stemware?
A standard 32 ECT single-wall box has a wall thickness of roughly 4 millimeters (5/32 inch), which flexes inward if a dolly handle or adjacent wood furniture corner bumps against the side panel. Dish Pack barrels upgrade to 48 ECT or 51 ECT BC-flute double-wall board, combining a 4 mm C-flute outer arch with a 3 mm B-flute inner arch bonded across three heavy kraft linerboards, yielding a 7 millimeter (9/32 inch) puncture shield and over 1,100 pounds of top-to-bottom compression resistance. Inside the 18 × 18 × 28 inch barrel, interlocking custom box inserts divide the interior into two or three vertical stories separated by flat 17.75 × 17.75 inch 32 ECT corrugated layer pads. Heavy ceramic dinner plates and platters stand vertically on edge inside the lower 4 × 4 grid (16 cells measuring 4.375 × 4.375 inches each), while delicate crystal wine stems and teacups ride in the upper 5 × 5 grid (25 cells measuring 3.5 × 3.5 inches each).
- Base shock cushion (3 to 4 inches): line the bottom of the Dish Pack with a flat corrugated pad over a dense bed of crumpled unprinted newsprint before inserting the first cell grid.
- Lower tier (heavy plates on edge): load dinner plates, soup bowls, and serving platters vertically on edge rather than stacked flat so road vibrations travel parallel to the ceramic rim.
- Middle load floor (17.75 × 17.75 in layer pad): place a rigid corrugated divider pad across the top of the lower grid to distribute the upper tier's weight evenly.
- Upper tier (5 × 5 stemware grid): slide each glass into a polyethylene foam pouch and place it rim-down inside its own 3.5 × 3.5 inch cell.
How are wardrobe moving boxes and steel hanger bars built for closet transfers?
Wardrobe cartons eliminate the need to pull suits, evening dresses, coats, and pressed shirts off their hangers, fold them into suitcases, and pay for steam pressing at the destination. A standard Full Wardrobe box measures 24 × 20 × 46 inches (or 24 × 24 × 40 inches) and is manufactured from 48 ECT BC-flute double-wall corrugated board so the tall sidewalls never bow outward when two movers carry the carton down a staircase. Across the top of the 20-inch left and right sidewalls, precision die-cut saddle notches accept a 24-inch formed galvanized steel hanger bar with curled locking flanges that clamp over the double-wall rim. Each 24-inch bar holds approximately two linear feet of residential closet rod, roughly 18 to 25 hanging garments weighing up to 80 pounds. A perforated fold-down front access door on the upper half of the 24-inch front panel lets crews hang clothing comfortably before folding the flap up and taping the top custom double-wall boxes flaps shut.

Know your size? Compare pricing across up to 3 quantities.
Request a Quote →How do telescoping flat-screen TV and mirror moving boxes adjust to screen width?
Modern LED, QLED, and ultra-thin OLED televisions range from 32 inches to 85 inches diagonally, making a single fixed-width carton impractical for moving company warehouses. Instead, professional fleets stock a two-piece telescoping double-wall TV carton, consisting of an inner Full Overlap (FOL) corrugated sleeve that slides smoothly inside a slightly wider outer FOL corrugated sleeve, allowing a single kit to expand anywhere from 40 inches to 72 inches in length while maintaining a narrow 6 to 8 inch depth and 36 to 40 inch height. Because a 55-inch or 65-inch television diagonal measures the screen corner to corner, buyers should always measure actual physical cabinet width and height in inches and add 3 inches on all four sides for the four high-density foam corner blocks. The foam blocks suspend the television by its outer bezel frame inside the custom corrugated boxes cavity so neither the front glass panel nor the rear circuit board touches the cardboard wall.

How should moving companies bundle and palletize specialty cartons for crews?
Because 48 ECT BC-flute double-wall board is nearly twice as thick as 32 ECT single-wall board, specialty cartons ship in smaller flat-strapped bundle counts so warehouse staff and residential clients can lift each bundle safely. Whereas standard Small and Medium moving boxes ship in strapped bundles of 20 or 25 flat blanks, 18 × 18 × 28 inch Dish Pack barrels are strapped in bundles of 10 blanks, and large 24 × 20 × 46 inch Wardrobe cartons ship in bundles of 5 blanks with a matching carton of 5 nested 24-inch steel hanger bars. When you order custom shipping boxes and specialty moving kits from CubitPack, our production team can palletize single-SKU bulk pallets or mixed residential apartment moving kits with custom flexographic fleet branding, pre-printed room checklists, and zero plate fees.
What are the most common mistakes with wardrobe, dish pack, and TV moving boxes?
Preventing these five packing and procurement mistakes stops crushed glassware, collapsed hanger rails, and cracked flat-screen panels
- Ordering 32 ECT single-wall cartons instead of 48 ECT double-wall barrels for kitchen china, allowing side impacts and van stacking pressure to crush fragile stemware.
- Stacking ceramic plates flat at the bottom of a Dish Pack instead of standing them vertically on edge inside corrugated cell dividers with a 3-inch crumpled paper base bed.
- Loading heavy books, toolboxes, or cast-iron cookware into the bottom floor of a Wardrobe carton, pushing total box weight past 100 pounds and tearing the bottom tape seam.
- Sizing a flat-screen TV box from the advertised diagonal screen number alone without adding 3 inches of clearance around the actual cabinet width and height for foam corner blocks.
- Laying a packed flat-screen TV or framed glass mirror carton flat on top of a moving truck load instead of strapping it vertically against a rigid wall.
Get a moving dieline at your size
A simplified drawing for planning your design. Your free production dieline comes with your proof, made for your exact size and board.
Packaging for this






Ready to order moving boxes? Compare up to 3 quantities with a free 3D mockup.
Request a Quote →Questions about moving boxes
What are the standard inside dimensions of a Dish Pack barrel moving box?
The US moving industry standard Dish Pack barrel measures 18 × 18 × 28 inches (or 18 × 18 × 27 inches) on the inside, providing 5.1 to 5.2 cubic feet of capacity. It is built from heavy 48 ECT or 51 ECT BC-flute double-wall corrugated board and shares an 18 × 18 inch base with Medium and Large moving boxes.
How many hanging clothes fit inside a 24 inch wide Wardrobe moving box?
A 24-inch wide Wardrobe moving box (24 × 20 × 46 inches or 24 × 20 × 34 inches) comes with a 24-inch steel hanger bar that holds two linear feet of closet rod space. Depending on garment thickness, that accommodates 18 to 25 shirts, suits, dresses, or jackets weighing up to 80 pounds on the bar.
How many glasses and plates fit in a Dish Pack cell divider kit?
A standard two-tier Dish Pack partition kit includes one 4 × 4 corrugated divider set (16 cells measuring 4.375 × 4.375 inches for plates, bowls, and mugs), one 5 × 5 divider set (25 cells measuring 3.5 × 3.5 inches for wine stems and glasses), and flat 17.75 × 17.75 inch layer pads, holding up to 41 separated kitchen pieces.
What size TV moving box fits a 55 inch, 65 inch, or 75 inch flat-screen TV?
A two-piece telescoping double-wall TV box that adjusts from 40 to 72 inches long × 8 inches deep × 40 inches high fits most 32-inch through 75-inch flat-screen televisions. Always measure your television's actual physical width and height in inches and allow 3 inches per side for the four foam corner blocks.
Can CubitPack print our moving company logo and room checklists on specialty boxes?
Yes. CubitPack custom prints 1-color or 2-color flexographic fleet logos, room inventory grids, fragile arrows, and barcode panels across Dish Pack, Wardrobe, TV, and standard moving boxes with no die or plate charges and free shipping across all 50 US states.
How fast can CubitPack deliver custom Dish Pack and Wardrobe moving boxes?
Standard production takes 10 to 14 business days after digital proof approval and payment, and rush production is available in 4 to 5 business days for peak summer moving season restocks. Contact your account manager if you need a trial order or custom mixed-size pallet.
Still have a question? Ask a packaging specialist.
Request a Quote →Request your moving boxes quote
Tell us your size and quantities, and one dedicated account manager prepares pricing for each tier.
- Free design & AI-to-print studio + 3D mockup
- No die or plate charges · 4–5 day rush available
- Free shipping to all 50 states
- 10% off your first order
The specialty carton inside dimensions, cubic volume formulas, 48 to 51 ECT BC-flute double-wall board specifications, and cell partition geometries in this guide were verified against Fibre Box Association structural standards and ASTM D4169 transit testing practices by a CubitPack packaging specialist.
Sources
What changed
- November 15, 2026: Published specialty moving box sizing and divider engineering guide covering Dish Pack barrels, Wardrobe boxes, and telescoping TV cartons.
More guides
New packaging guides by email
Sizes, materials and design tips. Unsubscribe anytime.