What size tie box do I need?

How do I measure a necktie or bow tie for a custom box?

Silk, wool and knitted neckties are cut on a 45-degree bias so they drape straight down a shirtfront, and most contain a resilient wool or brushed-cotton interlining. Because of that bias cut and interlining, you should never flatten a tie under a heavy weight when measuring for printed necktie boxes. Instead, lay the tie on a clean table, fold or roll it with the exact tissue paper and keeper ribbon your packers will use, and let the silk relax for thirty seconds before taking your measurements. Read the horizontal length from end to end, the width across the widest part of the blade, and the vertical height at the thickest overlapping fold. Add ¼ inch to both the length and the width so the bias-cut silk edges never scrape against the paperboard walls when the lid slides down. Keep the interior height within ⅛ to ¼ inch of the relaxed fold loft so the tie stays flat without getting pinched. Always record dimensions in inches as inside Length × Width × Height.

1. Blade width: measure across the widest point above the tip (usually 2.5 in for skinny ties, 3.25 in for classic ties, or 3.5 in for heritage blades) and add ¾ to 1.25 inches for tissue wrap and finger clearance.
2. Folded length: fold a 58-inch tie in half and tuck the narrow tail once so the finished bundle measures 13.5 to 13.75 inches long for a 14-inch box.
3. Rolled diameter: roll the tie loosely around two fingers from the narrow tail toward the wide blade and measure the cylinder diameter and height.
4. Relaxed loft height: measure from the tabletop to the top of the overlapping silk fold without pressing down on the interlining.
5. Write dimensions as inside L × W × H in inches, which is how every dieline and quote is engineered.

What are the standard custom tie box sizes by style?

While CubitPack cuts every order to your exact inside dimensions with zero die or plate charges, haberdasheries and menswear brands rely on six proven footprints. The 14 × 4.5 × 1 inch two-piece box has been the menswear counter benchmark for over a century because it displays a long run of the silk pattern while fitting inside a standard boutique shopping bag. Online neckwear brands and subscription clubs often pair or replace the 14-inch flat box with a 4.5 × 4.5 × 3.25 inch cube or drawer box that ships easily in small corrugated mailers. Use the size chart below as a starting point before testing your own neckwear samples.

How do I size a long flat tie box for standard, skinny and seven-fold ties?

In a traditional flat tie box, the shopper lifts the telescoping lid and sees 13 to 14 inches of uninterrupted silk from the wide tip up toward the center knot area. Because a standard tie is 57 to 58 inches long, folding it dead in half yields 28.5 to 29 inches, which is too long for a practical gift box. Haberdashers fold the narrow tail end under one more time so the overall folded length lands at 13.5 inches, fitting comfortably inside a 14-inch interior length. Width and height change with the cut and weave of your collection. If your brand specializes in 2.25 to 2.5 inch skinny ties, a narrower 14 × 3.5 × 0.875 inch box keeps the slim blade centered so it cannot rattle sideways. For classic 3.25 inch jacquard or rep-stripe ties, 14 × 4.5 × 1 inch leaves just enough room for a sheet of custom tissue paper. If you craft unlined seven-fold silk ties, thick cashmere ties or extra-long 63-inch tall-men's ties, step up to 14.5 × 5 × 1.5 inches so the lid never compresses the rolled edges.

What size cube or drawer box fits a rolled necktie?

Rolling a tie around a loose two-finger core or a small tissue cylinder avoids horizontal fold lines altogether and turns a 58-inch ribbon of silk into a compact cylinder roughly 3.5 to 4 inches in diameter. When stood on its edge inside a custom cube box or a tray and sleeve box, the height of the box corresponds to the width of the tie blade plus ¼ inch of top clearance. For a standard 3.25 inch blade, a 4.5 × 4.5 × 3.5 inch or 4.5 × 4.5 × 3.25 inch inside dimension cradles the roll gently so it cannot uncoil. If you sell 3.5 inch wide ties or thick knitted silk ties that form a wider coil when rolled, use a 5 × 5 × 3.75 inch drawer box. Many e-commerce menswear brands prefer this square footprint because it slips into a small corrugated outer mailer without the bending risk of a 14-inch flat carton.

What size box do I need for bow ties and groomsmen gift sets?

Bow ties are much shorter on display than neckties because the adjustable neck strap folds neatly behind a die-cut collar card while only the 4.5 to 4.75 inch wide bow sits on the front face. A 5.5 × 3.25 × 1.25 inch window box or two-piece carton gives a pre-tied or self-tie butterfly bow ¼ inch of breathing room on all four sides and enough vertical depth so the center knot never rubs against the window film. For wedding parties, corporate awards and holiday bundles that combine a necktie with a folded 12 × 12 inch pocket square, a tie bar and cufflinks, you can choose between two layouts. The classic flat presentation uses a 14 × 6.5 × 1.25 inch box where a full-length folded tie sits in a 4-inch wide left channel and the pocket square and metal accessories sit in a 2.25-inch right channel. The compact parcel layout uses an 8 × 6 × 2 inch magnetic rigid box with custom box inserts divided into four square cavities for a rolled tie, a folded pocket square, a lapel pin and cufflinks.

1. Pre-tied or self-tie butterfly bow tie: 5.5 × 3.25 × 1.25 in with a slotted collar card.
2. Oversized velvet or diamond-point tuxedo bow tie: 6 × 3.75 × 1.5 in so the plush pile is not flattened.
3. Flat tie + pocket square + tie bar set: 14 × 6.5 × 1.25 in with a two-channel card divider.
4. Rolled tie + pocket square + cufflinks set: 8 × 6 × 2 in with a multi-cavity card or EVA foam insert.

What are the most common tie box sizing mistakes?

Most neckwear sizing problems come from squeezing thick weaves into shallow cartons or forgetting how a tie moves when stood upright. Check these five before approving your dieline

1. Ordering a 0.625 or 0.75 inch shallow box for heavy jacquard, wool or seven-fold ties, which crushes the wool interlining at the fold.
2. Sizing the box width too close to a 3.5 inch tie tip, causing the bias-cut silk corners to curl against the tray walls.
3. Leaving a 14-inch flat tie box without an internal keeper band or tissue wrap, so the tie slides into the bottom end when displayed vertically.
4. Making a rolled-tie cube too wide (such as 6 × 6 in for a single tie), which lets the silk coil unwind and flatten in transit.
5. Forgetting to add ½ inch of height on bow tie boxes for the raised center knot and metal neckband hardware behind the collar card.

Find your size

Packaging for this

Custom Tie Boxes

Custom Apparel Boxes

Custom Belt Boxes

Custom Scarf Boxes

Custom Box Inserts

Custom Sunglasses Boxes

More guides