What size cannabis label fits pre-roll tubes, flower jars and mylar bags?

What are standard cannabis label sizes by container?

While every glass jar mold, polypropylene pop-top tube and child-resistant mylar bag varies slightly by supplier, US cultivators, extractors and dispensaries rely on six core label footprints. Every order at CubitPack is cut to your exact width × height or circle diameter in inches with zero die or plate charges. Customers supply their nutrition panel or state warning text and we check print legibility on the proof. Use the chart below as a starting baseline before testing a paper cutout on your physical container.

How do you measure 109 mm and 116 mm pre-roll tubes?

Polypropylene pop-top joint tubes and glass pre-roll tubes are narrow cylinders, typically measuring 0.55 in to 0.70 in in outside diameter. Two mechanical features determine your maximum label dimensions: the squeeze ring at the top of the tube and the slight draft taper toward the bottom base. On a pop-top tube, consumers squeeze just below the cap collar to pop the hinged lid open. If your label extends into that top 0.125 in to 0.20 in squeeze zone, flexing the plastic pops the top edge of the sticker loose. To calculate your exact wrap size, measure the straight vertical tube wall starting 1/8 inch below the squeeze ring or screw-cap skirt and stop 1/8 inch above the rounded bottom heel. On a standard 109 mm or 116 mm tube, that straight vertical height is usually 3.25 in to 3.50 in. Next, wrap a flexible tailor's tape around the tube circumference (or multiply outside diameter by 3.1416) and subtract 0.125 in so the leading and trailing wrap edges leave a clean gap rather than overlapping onto each other.

1. 109 mm and 116 mm pop-top plastic tubes: 1.75 in wrap width × 3.25 in height leaves a neat 1/8 in vertical gap and clears the top squeeze hinge.
2. 98 mm short dogwalker pre-roll tubes: 1.625 in wrap width × 2.50 in height fits compact single-joint tubes without crowding the cap.
3. Glass pre-roll tubes with child-resistant push-and-turn caps: 1.50 in wrap width × 3.00 in height stops cleanly below the flared plastic cap skirt.
4. Multi-pack pre-roll tins and jars: 2.00 × 3.00 in rectangular front panels or 2.25 in circular lid labels fit 5-pack tins and short glass multipack jars.

What size labels fit 3.5 g flower jars and 5 ml drams?

An eighth-ounce (3.5 g) flower jar is the flagship retail container in most dispensaries, typically using a 2 oz fluid-capacity straight-sided glass jar with a 53-400 child-resistant push-and-turn cap. Because the outer shell of a child-resistant cap overhangs the glass neck slightly and needs clearance to press down and twist, your body wrap label must sit strictly on the straight cylindrical glass wall between the neck shoulder and the bottom heel. On most 3.5 g jars, that usable vertical wall is 1.50 in to 1.625 in tall, and the circumference is roughly 6.75 in, making a 1.5 × 6.5 in band the standard full-wrap size. Because budtenders often stack flower jars in drawers or display cases where shoppers look down from above, pairing that side wrap with a 1.75 in or 2.0 in circular lid sticker makes strain identification effortless. Measure the flat recessed center inside the cap's outer knurled rim and subtract 1/8 in. For 0.5 g and 1 g live rosin, badder and shatter concentrates packed in shallow 5 ml or 9 ml thick-walled glass drams, there is almost no vertical side wall. Extractors solve this by placing a 1.0 in or 1.25 in circular brand sticker on the top cap and a matching 1.0 in or 1.25 in circle on the flat glass base for cannabinoid percentages, COA QR code and customer-supplied state warnings.

How do you size front and back labels for mylar bags?

Child-resistant exit bags and 3.5 g flower or gummy pouches let brands buy blank matte black, white, kraft or holographic pouches in bulk and apply strain-specific or flavor-specific labels on demand. An outer 3.5 g mylar bag usually measures 3.5 × 5.0 in or 4.0 × 6.0 in overall, but a large portion of that outer footprint is taken up by the top tear-notch header, the thick child-resistant press-to-close zipper track, the 0.25 in heat-sealed side fins and the bottom gusset fold. Always measure the flat printable panel between the inner edges of the left and right heat seals, starting 0.25 in below the bottom ridge of the child-resistant zipper and stopping 0.25 in above the bottom gusset crease. Subtract another 0.25 in horizontally and vertically so operators or semi-automatic flat-bag labelers have placement tolerance without hanging a sticker edge over a heat seam. On a standard 4.0 × 6.0 in eighth bag, that yields a crisp 3.0 × 3.5 in front brand label and a matching 3.0 × 3.5 in back label for potency, terpene percentages and batch coding.

How do you size lollipop and strip tamper-evident seals?

Many state cannabis rules require a tamper-evident seal showing that a flower jar, pre-roll tube or vape cartridge box has not been opened since leaving the licensed processor. When you order dispensary jar and pre-roll labels from CubitPack, we cut custom tamper shapes with zero die fee. The two most reliable geometries are the rectangular security strip and the lollipop seal. A rectangular tamper strip (typically 0.5 × 2.5 in for pre-roll tubes or 0.75 × 3.5 in for flower jars) starts on the top center of the cap, folds 90 degrees over the cap rim, and adheres at least 1.0 in down the vertical glass or plastic wall. A lollipop seal combines your circular lid badge (such as a 1.75 in circle) with an integrated 0.625 × 2.0 in tail strap in one continuous piece, so your packaging team applies the top strain badge and the tamper-evident bridge in a single motion. Always make sure the tail strap extends at least 0.75 in below the bottom skirt of the child-resistant cap so it bonds firmly to the glass jar wall.

1. Pre-roll tube tamper strip: 0.375 × 2.25 in or 0.50 × 2.50 in bridges over the pop-top cap and down the opposite side from the hinge.
2. 3.5 g flower jar lollipop seal: 1.75 in top lid circle with a 0.625 × 2.00 in integrated tail strap reaching onto the straight glass wall.
3. Concentrate dram security strip: 0.375 × 1.75 in narrow strip bridges across the low-profile child-resistant cap and onto the thick glass base.
4. Always check print legibility of any universal symbol or warning text printed on the lid circle on your digital proof before production.

What are the most common cannabis label sizing mistakes?

Child-resistant hardware and multi-part label sets leave very little margin for measurement guesswork. Watch out for these five sizing errors

1. Measuring the full outer height of a pop-top pre-roll tube instead of stopping 1/8 inch below the squeeze ring, which causes the top label edge to pop loose when the tube is squeezed.
2. Overlapping the ends of a wrap label on a narrow 0.55 inch pre-roll tube or dusty glass jar instead of leaving a 1/8 inch to 1/4 inch gap so adhesive bonds directly to the container.
3. Sizing a 3.5 g flower jar lid circle to the outside diameter of the child-resistant cap rather than the recessed inner flat disc inside the knurled rim.
4. Using the outer dimensions of a mylar bag instead of subtracting the child-resistant zipper header, side heat-seal fins and bottom gusset fold.
5. Making the tail strap of a lollipop tamper seal too short to clear the overhanging skirt of a push-and-turn child-resistant cap.

Find your label size

Packaging for this

Custom Cannabis Labels

Custom Roll Labels

Custom Sticker Sheets

Custom Clear Labels

Custom CBD Boxes

Custom Candle Labels

More guides