- Two-piece turned-edge rigid build: a V-grooved outer slipcase sleeve and a thick horizontal sliding drawer tray.
- 100% magnet-free friction glide (1.0–1.5 mm calibrated clearance) with woven ribbon pulls, thumb cuts, and optional safety stops.
- Starts at 50 boxes with 10–14 business days standard turnaround (4–5 business days rush available).
- Includes free design help, zero die or plate charges, a 2D dieline proof, a 3D mockup, and free US shipping.
Custom Drawer Boxes
Custom drawer boxes (also called rigid slide boxes, slipcase drawer boxes, or matchbox-style gift boxes) pair a V-grooved rigid outer sleeve with a sturdy inner rigid tray that glides out horizontally via a satin ribbon pull tab or thumb-cut notch. Engineered from 1.5–2.5 mm solid grayboard, orders start at 50 boxes in 10–14 business days with free US shipping.
What are custom drawer boxes?
Custom drawer boxes (also known as rigid slide boxes, matchbox-style rigid boxes, or luxury slipcase boxes) replace hinged lids and lift-off caps with a smooth horizontal furniture-drawer reveal. Every unit combines two non-collapsible turned-edge components: a V-grooved 1.5–2.5 mm solid grayboard outer sleeve (built either as a five-panel closed-back slipcase or a four-panel open-both-ends tube) and a corner-stayed rigid inner tray wrapped with 15–18 mm paper turn-ins. Because the inner drawer slides inside a calibrated 1.0–1.5 mm friction channel, the box stays securely closed without magnets, making it naturally safe for mechanical watches and electronics while stacking like miniature dresser drawers on a vanity or retail counter. Shoppers pull a woven grosgrain ribbon tab or press a semicircular thumb notch to glide the tray open and reveal custom EVA foam, velvet pads, or chocolate dividers. Orders start at 50 boxes in 10–14 business days.
How is a rigid drawer box built?
Built from two separate V-grooved 1.5–2.5 mm solid grayboard subassemblies wrapped with 15–18 mm turned-edge paper margins and matched to a 1.0–1.5 mm horizontal sliding clearance. Whether your team calls them slide rigid boxes, ribbon pull drawer boxes, luxury slide gift boxes, custom printed drawer boxes, drawer boxes with logo, printed drawer boxes or branded drawer boxes, every sheet is cut to your exact inside dimensions.
- 1V-grooved rigid outer sleeve
1.5–2.5 mm high-density grayboard tube scored with 90-degree V-grooves, built either as a closed-back slipcase (open one end) or push-through sleeve (open both ends). - 2Corner-stayed rigid inner drawer
1.2–2.0 mm grayboard base tray with crisp 90-degree wrapped walls (or double-wall rolled shoulders that hide insert edges). - 3Calibrated 1.0–1.5 mm glide channel
Precision dimensional offset accounting for grayboard caliper and paper wrap thickness so the drawer glides smoothly without jamming or slipping out. - 4Ribbon pull tab or thumb notch
Woven satin, grosgrain, or cotton pull loop anchored cleanly into the front drawer wall, or a semicircular finger cutout on the sleeve mouth. - 5Optional safety drawer stop
Concealed internal tether ribbon or stepped inner paperboard lip that halts the drawer at 80% extension so heavy perfume or watches cannot spill out.
Drawer box facts
- Closure
- Calibrated 1.0–1.5 mm sleeve friction fit with satin/grosgrain ribbon pull loop or semicircular thumb notch (100% magnet-free)
- Best for
- Fine jewelry, artisan chocolates, mechanical watches, luxury perfume, silk ties, cosmetics sets, corporate gifts, macarons
- Window
- Yes, optional rigid clear PET window patch die-cut into the top face of the outer rigid sleeve
- Inserts
- Custom velvet-flocked EVA foam, EPE foam, suede watch pillows, food-safe chocolate/macaron blisters, or molded pulp cradles
- Minimum
- 50 boxes
- Turnaround
- 10–14 business days, rush 4–5
- Materials
- 1.5–2.5 mm high-density solid grayboard wrapped in 157 gsm SBS art paper, natural kraft, textured linen, or recycled paper
- Arrives
- Pre-assembled 3D with inner drawer seated inside outer sleeve
- Size range
- Any inside L × W × H to order
Rigid drawer box vs tray and sleeve box vs book-style box
| Drawer | Tray and sleeve | Book style | |
|---|---|---|---|
| Core board & wall feel | 1.5–2.5 mm solid grayboard (heavy turned-edge luxury) | 16–24 pt folding paperboard (lightweight retail card) | 1.5–2.5 mm solid grayboard (hardcover book jacket) |
| Opening motion | Horizontal drawer pull via ribbon tab or thumb notch | Push-through open-ended paperboard sleeve | Side-hinged book cover opening 180 degrees flat |
| Minimum order | 50 boxes (rigid setup family) | 1,000 boxes (card box family) | 50 boxes (rigid setup family) |
| Vanity & counter footprint | Stacks vertically like miniature dresser drawers | Compact linear footprint; light shelf display | Needs 2× horizontal width when cover swings open |
| Magnet-free watch/tech safety | 100% magnet-free calibrated friction fit | 100% magnet-free paperboard friction fit | Uses hidden spine magnets (unless ribbon tie chosen) |
| How boxes ship to you | Pre-assembled 3D ready to pack | Flat-packed or pre-glued folding blanks | Pre-assembled 3D ready to pack |
Save this comparison
The styles on one sheet. Pin it, or share it with whoever packs your boxes.
Still deciding between styles?
Request a Quote →Is a custom drawer box right for my product?
- You want a tactile, slow-paced horizontal ribbon-pull reveal that customers reuse on their dresser or desk like a miniature jewelry drawer
- You are packaging mechanical watches, sensitive electronics, or fine jewelry where a 100% magnet-free luxury rigid closure is preferred
- You want low-minimum luxury rigid setup boxes starting at 50 units that arrive pre-assembled with zero folding required at your packing bench
- You sell multi-piece chocolates, macarons, or skincare vials that display beautifully in a single row as the drawer glides out
- You want two-tone color-blocking between a dark foil-stamped outer rigid sleeve and a vibrant contrasting inner rigid drawer wall
- You want the same sliding reveal in lightweight 16–24 pt folding paperboard for high-volume retail runs of 1,000+ units: paperboard tray and sleeve box
- You want a side-hinged hardcover jacket that swings open 180 degrees to display an interior brand story on the inside cover: book-style rigid box
- You want a one-piece flip-top rigid lid that snaps shut at the front with concealed neodymium magnets: magnetic closure rigid box
- You want a classic lift-off rigid lid and base with a slow telescoping drop: two-piece rigid box
- You need a large luxury rigid box that ships 100% flat to cut warehouse storage volume by 75–85%: collapsible rigid box
What are custom drawer boxes used for?
Fine necklaces and rings, artisan chocolate truffles, mechanical wristwatches, glass perfume flacons, woven silk neckties, skincare discovery kits, executive corporate gifts, and French macarons
What are custom drawer boxes made of?
Every rigid drawer box combines a dense 1.5–2.5 mm solid grayboard structural core with precision 15–18 mm turned-edge wrapping papers selected for smooth sliding friction.
Which finishes work on a rigid drawer box?
What can I add to a custom drawer box?
Drawer box specifications
| Spec | Options |
|---|---|
| Construction | Two-piece turned-edge rigid setup: V-grooved outer sleeve (closed-back slipcase or open-both-ends) + rigid inner sliding tray |
| Sliding clearance | Calibrated 1.0–1.5 mm total width and height friction gap adjusted for wrap paper texture |
| Board | 1.5–2.5 mm solid high-density grayboard outer sleeve; 1.2–2.0 mm grayboard inner drawer tray |
| Board thickness | 1.2 mm to 2.5 mm rigid grayboard typical |
| Pull options | Grosgrain, satin, or cotton ribbon pull tab, semicircular thumb notch, or push-through open sleeve |
| Printing | Full-color CMYK, Pantone spot matching, two-tone contrasting inner drawer wrap, white ink on kraft |
| Lamination | Soft-touch matte, scuff-free matte, gloss BOPP, or specialty textured linen wrap |
| Finishes | Hot foil stamping, blind debossing, 3D embossing, raised 3D spot UV |
| Add-ons | Clear PET sleeve window, safety drawer stop tether, double-wall inner tray rim, EVA foam or food-safe inserts |
| Size range | Custom built around usable Inside Drawer L × W × D; min/max |
| Quantity | From 50 boxes; delivered within ±5% of the order |
| Proofs | Free 2D vector dieline proof and 3D mockup before payment; physical prototype or printed sample available |
| Turnaround | 10–14 business days standard; 4–5 business days rush |
Ready to quote drawer boxes? Compare up to 3 quantities with a free 3D mockup.
Request a Quote →What goes on each panel of a rigid drawer box?
- 1Outer sleeve top face (L × W)
Primary hero canvas for hot-stamped metallic foil logo, blind debossed emblem, Spot UV pattern, or clear PET window. - 2Front drawer pull wall (W × D)
Exposed rigid end wall framing the grosgrain ribbon pull loop or contrasting behind a semicircular thumb-cut notch. - 3Inner drawer side walls & rim
Secondary color-blocking surprise that progressively reveals a brand tagline or foil accent as the customer slides the tray out. - 4Interior drawer floor
Printed welcome message beneath a removable product, or the anchor bed for a velvet-flocked EVA foam or food-safe divider. - 5Outer sleeve sides & bottom base
Clean bookshelf spine branding along the closed back and long side walls, with discrete regulatory details underneath.
Drawer box design ideas
Example designs with made-up brands. Your box is made to your design.
What are the most common custom drawer box mistakes?
Avoid these five structural and sizing pitfalls when specifying custom turned-edge rigid slide drawer boxes. For buyers ordering wholesale drawer boxes, bulk custom drawer boxes, personalized drawer boxes, custom size drawer boxes, luxury rigid drawer boxes or wrapped chipboard drawer boxes, watch out for these common sizing and artwork mistakes
- Calculating outer sleeve dimensions without adding board caliper, four layers of wrap paper, and a 1.0–1.5 mm glide gap, which either jams the drawer or lets it fall out when tilted.
- Ordering a five-panel closed-back slipcase sleeve without a ribbon pull tab or semicircular thumb notch, trapping an air pocket behind the drawer with nothing for fingers to grip.
- Allowing bottle caps, watch crowns, or ribbon bows inside the insert to protrude even 1 mm above usable Inside Depth (D), causing them to scrape the inside ceiling of the sleeve.
- Placing heavy raised embossing or chunky glitter paper on the exterior side walls of the inner drawer where friction surfaces rub against the sleeve.
- Skipping an internal safety-stop tether on heavy glass fragrance or corporate tumbler drawers, risking a dropped tray if a customer pulls too hard.
Chat with a designer now
Share your logo, a sketch or an AI image. We'll rebuild every element cleanly onto your box dieline and send a 3D mockup, free.
Made your design with AI?
Generated a concept in Google Gemini, ChatGPT, Claude or Midjourney? Send us your AI image: we rebuild every element onto your box dieline and show you a 3D mockup before you pay, free.Custom vs stock drawer boxes: which is better?
| Stock (plain) boxes | Custom boxes from CubitPack | |
|---|---|---|
| Branding | Plain, or a label on the front | Your logo and colors, inside and out |
| Fit | Fixed sizes | Made to your exact size |
| Minimum | Any quantity | 50 boxes |
| Lead time | Ships right away | 10–14 business days, rush 4–5 |
| Design | None | Free design help, proof and 3D mockup |
Get custom drawer boxes made to your exact size, with a free 3D mockup before you pay.
Request a Quote →Are drawer boxes eco-friendly?
Kraft and recycled board
Choose kraft or recycled board for a lower-impact box.FSC paper available
FSC paper and ISO 9001 production are available on request.Food-safe on request
For food, we make it in a certified partner facility. Certificates and lab tests on request.How do I order custom drawer boxes?
Tell us what you need
Size, quantities or AI conceptCompare volume pricing
Dedicated account managerApprove your proof
Digital proof + 3D mockupMade and shipped
Free to all 50 statesHow much do custom drawer boxes cost?
The price depends on four things, and every custom quote is free.
Size
Bigger packaging uses more materialQuantity
The unit price drops as you order moreMaterial
The board, film or paper you chooseFinishes
Foil, windows and lamination add costYour first order is 10% off, and we beat written quotes from US competitors for the same specs.
10% off your first order.
Request a Quote →What do I need to send for a quote?
- The product and how many you need
- The inside size, or what goes in it
- A style, or ask us to suggest one
- Your logo or artwork (an AI image is fine)
- Pantone codes, if you have them
- Delivery ZIP code and the date you need it
Can I see a sample first?
Sample kit
Board and finish swatches, sample boxes, labels and bags. Credited to your first order.Digital proof + 3D mockup
See it before you payPrinted sample
Of your own designHow do the boxes ship?
- Free shipping to all 50 states
- Worldwide with DDP prices: duties and taxes included
- Blind and split shipping
- Damaged in transit? We reprint the damaged units free
Why brands choose CubitPack
Dedicated specialist
One account manager from quote to deliveryPantone guaranteed
Clearly off? We reprintReprint or refund
If we get it wrong, you chooseBBB accredited
A US business you can checkDrawer box questions
What is the difference between a rigid drawer box and a tray and sleeve box?
A custom rigid drawer box is built from thick 1.5–2.5 mm solid grayboard wrapped in turned-edge paper (starting at 50 units), often with a closed back and a ribbon pull tab. A tray and sleeve box uses thinner 16–24 pt folding paperboard (starting at 1,000 units) with an open-ended push-through sleeve.
Should I choose a closed-back slipcase sleeve or an open-both-ends sleeve?
Choose a five-panel closed-back slipcase paired with a satin or grosgrain ribbon pull when you want a true furniture-drawer stop and luxury keepsake presentation. Choose a four-panel open-both-ends sleeve with a thumb notch when you want customers to push the tray out from either side.
How do you keep the inner drawer from sliding out on its own or jamming?
Prepress calibrates a 1.0 to 1.5 mm total horizontal and vertical clearance gap between the wrapped outer dimensions of the inner drawer and the inner cavity of the rigid sleeve, tuned specifically to your chosen paper finish (such as soft-touch matte versus textured linen).
Can you add a safety stop so the inner drawer doesn't pull all the way out?
Yes. For heavy glass perfume flacons, watches, or ceramic jars, we can anchor a discrete grosgrain safety tether ribbon or an interlocking double-wall paperboard stop lip inside the box so the drawer halts smoothly at 75–85% extension.
Are custom rigid drawer boxes completely magnet-free?
Yes. Standard rigid slide drawer boxes rely on calibrated sleeve-to-tray friction rather than embedded magnets, making them ideal for mechanical automatic watches, sensitive audio gear, medical devices, and brands seeking simple curbside paper recyclability after insert removal.
Can I add a clear window to the top of a rigid drawer box?
Yes. We can die-cut a framed window into the top panel of the rigid outer sleeve and bond a crystal-clear rigid PET window patch inside the wrap turn-in, showcasing chocolates, macarons, or cosmetics while keeping them dust-free.
Are custom drawer boxes safe for chocolates, macarons, and gourmet confections?
Food-safe materials and food-contact inner liners or PET confection trays are available on request through certified partner facilities so truffles, macarons, and tea tins sit safely inside your rigid drawer.
What is the minimum order quantity for custom rigid drawer boxes?
Custom printed rigid drawer boxes start at 50 units, with zero die or plate charges, free artwork check and 3D mockup before payment, and free shipping across all 50 US states.
How long does production take for custom drawer boxes?
Standard production takes 10–14 business days after proof approval and payment, and 4–5 business day rush turnaround is available when you have a tight retail or event launch.
Do custom rigid drawer boxes ship flat or pre-assembled?
Rigid setup drawer boxes typically ship pre-assembled with each inner drawer nested inside its outer sleeve inside protective master cartons so your fulfillment team can pack immediately.
Still have a question? Ask a packaging specialist.
Request a Quote →Parts of a drawer box
- Closed-back slipcase
- A five-panel rigid outer sleeve sealed at the rear end so the inner drawer slides out from one front opening only
- Sliding friction clearance
- The 1.0–1.5 mm gap between outer tray walls and inner sleeve walls that controls smooth, rattle-free glide
- Double-wall shoulder tray
- An inner rigid drawer built with rolled double-thick side walls that conceal foam insert edges for an ultra-luxury look
- Ribbon pull loop
- A woven grosgrain, satin, or cotton tab anchored into the front drawer wall to break air suction and pull the tray out
- Thumb-cut notch
- A half-moon cutout along the front mouth of the outer sleeve so fingers can grip and pull the inner drawer directly
- Safety drawer stop
- An internal ribbon tether or stepped lip that stops the sliding tray before it can detach and spill heavy contents
Other box styles
Learn more about drawer boxes
Get your drawer boxes price
One dedicated account manager prepares pricing across up to 3 quantities.
- Free design & AI-to-print studio + 3D mockup
- No die or plate charges · 4–5 day rush available
- Free shipping to all 50 states
- 10% off your first order
- Reprint or refund if we get it wrong
We verified two-piece rigid slipcase and inner drawer V-grooved construction, 1.0–1.5 mm horizontal sliding clearance tolerances, ribbon pull vs thumb-cut air relief mechanics, and 1.2–2.5 mm solid grayboard calipers against Paperboard Packaging Council (PPC), National Paperbox Association (NPA), and TAPPI T 411 technical references. A packaging specialist checked every specification against CubitPack capabilities. Spot something wrong? Tell us and we fix it. Tell us if something looks wrong.
Sources
- Paperboard Packaging Council specifications for V-grooved turned-edge rigid slipcase sleeves, 1.0–1.5 mm sliding friction clearances, and ribbon pull air-relief design
- National Paperbox Association standards for corner-stayed rigid inner trays, double-wall rolled drawer rims, and 15–18 mm wrap turn-in margins
- TAPPI T 411 high-density solid grayboard caliper measurements (1.2–2.5 mm / 800–1600 gsm)
What changed
- November 5, 2026: First published with two-part V-grooved sleeve-and-drawer CAD layout, 3-step packing diagram, Rigid Drawer vs Tray & Sleeve vs Book-Style comparison, 15 studio images, and 3 technical guides.