Custom backing cards for Orra and Voltline holding pins, earrings, and a clip with gold foil and hang slots
In short
  • Mount enamel pins, earrings, necklaces, hair clips, patches, and keychains on stiff flat or folded cards.
  • Add pre-punched post holes, 45-degree chain slits, clip windows, and Euro hang slots with zero die fees.
  • Print one or both sides in CMYK, Pantone, or white ink on kraft with soft-touch, matte, gloss, foil, or spot UV.
  • Order from 250 standalone cards in 10-14 business days with free shipping across all 50 US states.
Need sizing help or a rush run?Free dielines · 3D mockup · 4–5 day rush.
Jewelry packaging

Custom Backing Cards

Reviewed by CubitPack Prepress & Structural Studio, packaging specialistUpdated November 16, 2026

Custom backing cards printed on one or both sides and precision die-cut with pin holes, earring piercings, necklace slits, clip cutouts, and retail hang slots. Order from 250 standalone cards or match your paired box order, with free design help and no die or plate charges. Standard turnaround is 10-14 business days, with 4-5 business day rush quoted and free shipping across all 50 US states.

From 250 backing cardsZero die or plate feesPin holes, slits & hang slotsFoil, embossing & spot UVFree shipping, 50 states

What are custom backing cards?

Custom backing cards are stiff, two-sided or single-sided paperboard display cards engineered to hold, frame, and merchandise small retail items such as hard and soft enamel pins, stud and dangle earrings, pendant necklaces, hair clips, patches, and metal keychains. Unlike loose poly-bagged goods or internal instruction leaflets, a die-cut backing card anchors your product at eye level on boutique pegboards, craft-fair tabletop grids, or inside rigid jewelry drawer boxes while keeping delicate chains and posts from tangling or scratching. We cut custom pin holes, paired earring piercings, 45-degree chain slits, barrette slots, and Euro or round hang holes with zero die or plate charges. Print in full-color CMYK, Pantone spot inks, or white ink on natural kraft, then add matte, gloss, or soft-touch lamination plus metallic foil stamping, embossing, debossing, or spot UV. Minimums start at 250 standalone backing cards, delivered in 10-14 business days with free shipping to all 50 US states.

At a glance

Backing cards facts

Minimum
250 standalone cards (or paired box MOQ)
Turnaround
10-14 business days
Rush
4-5 business days, quoted
Styles
Flat card or Folded card
Die cuts
Pin/earring holes, slits, clip slots, Euro tabs
Printing
One or Both sides · CMYK, Pantone, White ink
Finishes
Matte, gloss, soft-touch, foil, emboss, spot UV
Tooling
Zero die fees · Free 2D proof & 3D mockup
Shipping
Free to all 50 US states
Styles

Which custom backing card layout fits my product?

Card formatDie-cut retentionPrimary product fitPrint & finish
Enamel pin card1 or 2 pre-punched 1.2 mm post holesHard/soft enamel pins, lapel badgesCMYK art + holographic/gold foil + soft-touch
Earring & stud card2-6 post holes + French-wire notchesStud pairs, ear stacks, drop earringsFoil logo on matte white or kraft card
Necklace slit card45° shoulder slits or rear chain flapPendant chains, chokers, ankletsTwo-sided print with rear chain pocket
Hair clip & bow cardBarrette cutouts or pinched waistClaw clips, snap barrettes, scrunchiesScuff-resistant matte or gloss lamination
Keychain & cello cardEuro sombrero or 1/4 in peg holeMetal keyrings, patches, cello packsFront branding + rear GS1 UPC barcode

Not sure which style fits?

Request a Quote →
Sizes

What size custom backing card fits pins, earrings, hair clips, and cello bags?

Leave at least 3/8 inch of border around your item, plus 5/8 inch at the top when adding a retail pegboard slot. Size width 1/8 to 1/4 inch under your clear OPP cello pouch or jewelry box tray

Card size (W × H)Fits productsCello bag or box fit
2 × 2 inMini stud pairs, nose studs, 0.75 in collar pins2.25 × 2.5 in bag or 2.5 in earring box
2 × 3.5 in1.25-1.5 in single/dual-post pins, drop earrings2.25 × 4 in bag or 3.5 in jewelry drawer
2.5 × 3.5 in1.75 in collector pins, charms, brass keychains2.625 × 3.75 in trading sleeve or bag
3 × 4 inPendant necklaces, 3-pair studs, snap barrettes3.25 × 4.5 in bag or 3.5 × 4.5 in box
3.5 × 5 inClaw clips, woven patches, enamel pin 3-packs3.75 × 5.5 in bag or small mailer box
4 × 6 inStatement sets, scrunchy trios, folded pocket cards4.25 × 6.5 in bag or 5 × 7 in gift box

Have your inside dimensions ready? Request pricing across up to 3 quantities.

Request a Quote →

Save the size chart

Every common size on one sheet. Pin it for later.

Buying guide

How do I choose backing cards?

  1. Match cutouts to hardwareShare post spacing, hook gauge, chain width, or clip size for exact cutouts.
  2. Pick Flat vs FoldedUse flat cards for pins, studs, and clips; use folded cards for necklace chains.
  3. Reserve 5/8 in peg headroomKeep 5/8 in at top for Euro or round slots with a 1/4 in bridge.
  4. Clear cello bag seamsTrim 1/8 in under flat pouches, or 1/4 in narrower for pin clutches.
  5. Laminate pegboard cardsMatte or soft-touch film strengthens hang slots and resists metal scuffs.
  6. Group SKUs in one runShare one dieline across 2 or 3+ pin artworks or metal tiers.
Materials

What are backing cards made of?

Finishes

Which finishes can backing cards have?

Add-ons

Which die-cut punches and display features can I add?

Custom outer silhouettesArches, badges, clip waists, or 1/8 in rounded corners, zero die fee
Earring & pin post holes1.2-1.5 mm post piercings, multi-pair grids, and French-hook notches
Chain slits & clip windows45-degree chain slits plus rectangular windows for barrettes and clips
Euro & round hang slotsCentered peg cutouts with a 1/4 in top bridge for balanced hanging
Specifications

Backing cards specifications

SpecOptions
Card stylesFlat card or Folded card (pre-scored chain flap or tent)
Dimensions2 × 2, 2 × 3.5, 2.5 × 3.5, 3 × 4, 3.5 × 5, 4 × 6 in or custom
MaterialsWhite card, kraft board, recycled board
Die-cut cutoutsPin/earring holes, chain slits, clip windows, Euro/round hang slots, custom shapes (no die fee)
PrintingOne or Both sides · CMYK, Pantone (match guaranteed), White ink on kraft
FinishesNo lamination, Matte, Gloss, Soft-touch · Foil, Embossing, Debossing, Spot UV
Minimum orderFrom 250 standalone cards (or paired box MOQ); presets 250, 500, 1,000, 2,500, 5,000
ProofingFree design help, custom dieline, 2D proof & 3D mockup before payment
Turnaround10-14 business days (4-5 day rush, quoted); free 50-state US shipping

Ready to quote your backing cards? Compare up to 3 quantities with a free 3D mockup.

Request a Quote →
Uses

Which retail products use custom backing cards?

A well-proportioned backing card turns tiny loose hardware into a structured retail display item that photographs cleanly for online listings, hangs straight on store fixtures, and slips directly into mailer or drawer boxes

Hard and soft enamel pins, lapel badges, and trading pins
Hard and soft enamel pins, lapel badges, and trading pinsPin artists, museum shops, and streetwear labels mount single-post and dual-post pins on 2 × 3.5 inch or 2.5 × 3.5 inch illustrated cards where custom background art extends the pin scene and rubber clutches lock behind the board.
Stud earrings, hoops, pendant necklaces, and anklets
Stud earrings, hoops, pendant necklaces, and ankletsFine and demi-fine jewelry studios pair foil-stamped 2 × 2 inch stud squares or 3 × 4 inch arch cards featuring pre-punched earring holes and 45-degree chain slits that drop neatly into rigid drawer boxes.
Claw clips, snap barrettes, silk bows, and scrunchies
Claw clips, snap barrettes, silk bows, and scrunchiesHair accessory brands die-cut horizontal clamping windows or contoured hourglass waists into 3 × 4 inch and 3.5 × 5 inch laminated cards so acetate clips and elastic bands stay centered on boutique spinner racks.
Metal keychains, iron-on patches, and cello pouch hang packs
Metal keychains, iron-on patches, and cello pouch hang packsMerchandise lines, outdoor outfitters, and gift makers combine Euro-slotted backing cards with clear self-seal OPP poly pouches, displaying bold branding up front and retail UPC barcodes plus heat-press instructions on the back.
Design ideas

Backing cards design ideas

Example designs with made-up brands. Your packaging is made to your design.

Soft-touch 2.5 × 3.5 in pin and earring backing cards with gold foil
Soft-touch 2.5 × 3.5 in pin and earring backing cards with gold foil
Front and back view showing rubber pin clutches and rear chain flap
Front and back view showing rubber pin clutches and rear chain flap
Macro detail of gold foil, spot UV, and 1.5 mm earring post piercings
Macro detail of gold foil, spot UV, and 1.5 mm earring post piercings
Arch jewelry backing cards with 45-degree slits beside a drawer box
Arch jewelry backing cards with 45-degree slits beside a drawer box
Avoid these

What mistakes should you avoid when ordering custom backing cards?

Avoid these five clearance and die-cut layout errors before approving your proof

  1. Placing a hang hole closer than 1/4 in to the top trim, leaving a weak bridge that rips.
  2. Cutting cards the exact width of your OPP cello bag instead of 1/8 to 1/4 in narrower.
  3. Punching earring holes under 3/8 in apart so wide stud bezels or hoops overlap.
  4. Printing a UPC barcode over the center back zone where pin clutches cover the bars.
  5. Running hot foil across narrow 45-degree chain slits where sliding chains lift the edge.
Free design help

Chat with a designer now

Share your logo, a sketch or an AI image. We'll rebuild every element cleanly onto your box dieline and send a 3D mockup, free.

Book a call

Made your design with AI?

Generated a concept in Google Gemini, ChatGPT, Claude or Midjourney? Send us your AI image: we rebuild every element onto your box dieline and show you a 3D mockup before you pay, free.
AI studio details
Compare

Custom die-cut backing cards vs hand-punched business cards: how do they compare?

Hand-punched business cardsCustom backing cards from CubitPack
Holes & slitsBlank cards hand-punched with pliersFactory die-cut holes, slits & Euro slots
Shape & die costPlain square corners onlyArches, badges & clip waists, zero die fee
Hook strengthThin stock that curls and ripsLaminated board with 1/4 in top bridge
Bag & box fitJams pouches or rattles in boxesTrimmed to 1/8 in for your bag or tray
Multi-SKU runsOne generic card for every itemSplit 2 or 3+ SKU designs in one order

Get custom backing cards sized to your product, with a free 3D mockup before you pay.

Request a Quote →
Safety and sustainability

Are backing cards safe and sustainable?

FSC paperboard on request

FSC paperboard and ISO 9001 production are available on request through partner facilities, with certificates supplied on request.

Bridge & foil safe-zone check

Prepress verifies a 1/4 inch top bridge above hang slots and keeps foil 2 mm clear of post piercings.

Retail barcode contrast check

We check quiet-zone margins and dark-on-light contrast on reverse UPC barcodes on your free digital proof.
How it works

How do I order custom backing cards?

1 · Start

Tell us what you need

Size, quantities or AI concept
2 · Custom quote

Compare volume pricing

Dedicated account manager
3 · Before you pay

Approve your proof

Digital proof + 3D mockup
4 · 10–14 days

Made and shipped

Free to all 50 states
Pricing

What affects the price of custom backing cards?

The price depends on four things, and every custom quote is free.

Dimensions & fold

A 2 × 2 in flat card uses far less board than a 4 × 6 in folded card

One vs both sides

Front-only costs less; two-sided adds rear barcodes and care notes

Lamination & foil

Matte or gloss costs less than soft-touch paired with foil and embossing

Quantity & SKUs

Unit cost drops across 250, 500, 1,000, 2,500, and 5,000+ tiers

Standardize on one shared size (like 2 × 3.5 in or 3 × 4 in) and choose '2 designs' or '3+ designs' to group SKUs. Dies carry zero fees, first orders get 10% off, and US shipping is free.

10% off your first order.

Request a Quote →
Get a quote

What do I need to send for a quote?

Samples

Can I see a sample first?

Shipping

How does shipping work?

Why CubitPack

Why brands choose CubitPack

Dedicated specialist

One account manager from quote to delivery

Pantone guaranteed

Clearly off? We reprint

Reprint or refund

If we get it wrong, you choose

BBB accredited

A US business you can check
FAQ

Backing cards questions

What size custom backing card fits enamel pins, earrings, and keychains?

Single and dual-post enamel pins and drop earrings usually use a 2 × 3.5 inch or 2.5 × 3.5 inch card, while mini studs fit a 2 × 2 inch square. Pendant necklaces and snap barrettes fit 3 × 4 inches, and claw clips or patch sets use 3.5 × 5 inches.

Can you pre-punch pin holes, earring piercings, necklace slits, and Euro hang slots?

Yes. CubitPack includes custom cutting dies with zero die or plate charges, so we pre-punch 1.2 to 1.5 mm post holes, French-hook side notches, 45-degree necklace slits, rectangular barrette windows, and 1/4 inch round or Euro sombrero pegboard slots right on press.

What is the difference between custom backing cards, header cards, and insert cards?

Custom backing cards hold products directly through die-cut holes or slits inside boxes or clear pouches. Custom header cards fold over the top of a poly bag to seal it shut as a bag topper, while custom insert cards slip loose into packages with instructions.

What is the minimum order quantity for custom backing cards?

Standalone orders start at 250 custom backing cards, or match the minimum of your paired custom boxes when ordered together. In Step 1 of the quote form, compare quick-add tiers of 250, 500, 1,000, 2,500, or 5,000+ cards for volume savings.

Should I choose a flat backing card or a folded pouch-pocket backing card?

Pick a flat card for enamel pins, stud and hoop earrings, hair clips, patches, and keychains where clutches or clips lock cleanly behind one stiff panel. Choose a pre-scored folded card when long necklace chains need a rear pocket to stay untangled.

How do I size a custom backing card to fit inside a clear cello bag or jewelry box?

For clear self-seal OPP cello pouches, cut your card 1/8 inch narrower than the bag interior for flat earrings or patches, and 1/4 inch narrower for bulky rubber pin clutches or keyrings. For rigid jewelry drawer boxes, deduct 1/8 inch from tray width.

Can I combine multiple enamel pin or jewelry SKU designs in one order?

Yes. Select '2 designs' or '3+ designs' in Step 2 of the quote form and list your quantity split. Sharing one outer size, cardstock, and lamination across illustrated pin artworks or gold, silver, and vermeil jewelry tiers keeps production simple.

Which lamination and foil finishes hold up on pegboard retail displays?

Soft-touch and matte laminations perform well on boutique pegboards because the film reinforces tear strength around the top hang slot and stops metal hardware from scuffing dark ink. Pair them with gold, silver, or holographic foil stamping for sharp contrast under store lights.

Where should I place retail barcodes and care notes on a backing card?

Choose both-side printing and place your GS1 UPC barcode, SKU text, metal stamp note, and care icons on the lower back panel. Keep the barcode inside a clean white rectangle away from rear pin clutches so retail scanners read it immediately.

How long do custom backing cards take to print, die-cut, and deliver?

Standard turnaround is 10 to 14 business days after you approve your free digital 2D dieline proof and 3D mockup and submit payment. Rush production in 4 to 5 business days is available (extra cost quoted per order), and 50-state US shipping is free.

Still have a question? Ask a packaging specialist.

Request a Quote →
Terms

Backing cards terms, explained

Euro sombrero slot
T-shaped top cutout balancing cards on peg hooks
Top hang bridge
1/4 in+ board strip supporting weight above peg holes
Clutch clearance
Rear 12 mm pin-back zone kept clear of barcodes
45-degree slits
Angled shoulder cuts suspending pendants centered
Bag allowance
1/8 to 1/4 in width gap for clear OPP pouches
Foil safe zone
2 mm margin keeping foil crisp around punches
Related

More for your jewelry packaging

Guides

Learn more

Get your backing cards price

One dedicated account manager prepares pricing across up to 3 quantities.

  • Free design & AI-to-print studio + 3D mockup
  • No die or plate charges · 4–5 day rush available
  • Free shipping to all 50 states
  • 10% off your first order
  • Reprint or refund if we get it wrong
Reviewed by CubitPack Prepress & Structural Studio, packaging specialist at CubitPackPublished November 16, 2026Updated November 16, 2026Next review February 14, 2027
How we checked this page

Every CubitPack offer on this page (250 standalone minimum, flat and folded cards, zero-fee hole and slit die-cutting, CMYK/Pantone/white ink, finishes, 10-14 business day turnaround, and free US shipping) was checked by a packaging specialist. Tell us if something looks wrong.

Sources
  1. CubitPack standalone 250-card minimum, 10-14 business day turnaround (4-5 day rush), free design help, zero die or plate charges, and free 50-state shipping
  2. Paperboard caliper measurement, grain-direction bending stiffness, and hang-hole tear resistance principles
  3. Retail UPC barcode quiet-zone margins and scan contrast on reverse backing card panels
What changed
  • November 16, 2026: First published with size chart, cutout options, and cello bag clearances.
SharePinterestLinkedIn
Helpful?