Guide · Header cards

What size fold-over header card or bag topper fits my poly or cello bag?

Short answer: Size custom header cards 1/8 inch (0.125 in) wider than crisp flat BOPP cellophane bags or 1/4 inch (0.25 in) wider than thick LDPE poly and side-gusseted bags, with a 1.5 to 3.0 inch folded flap height that doubles for your flat sheet.

Quote header cards
Graduated lineup of four custom fold-over header card sizes from small pin bags to wide snack and hardware bags
On this page
  1. How much wider should a fold-over header card be than my poly or cello bag
  2. What are the standard folded and flat header card sizes for 3-inch to 8-inch retail bags
  3. How tall should each folded flap be to fit a Euro sombrero slot or round peg hole
  4. How do side-gusseted snack bags and extended back lips change bag topper dimensions
  5. How fast can I order custom-sized header cards from 250 units with zero die charges
  6. Common mistakes
  7. FAQs
Request a custom quoteFree dieline & 3D mockup

Picking the right fold-over bag topper dimensions comes down to two independent measurements: horizontal bag-mouth width and vertical folded flap height. If you order a header card the exact nominal width of a 4-inch poly bag, manufacturing tolerances in plastic heat-sealing plus product bulge push clear plastic ears out past the cardstock corners on retail pegboards. Adding 1/8 inch of total width overhang (1/16 inch per side) hides crisp BOPP cello seams, while adding 1/4 inch (1/8 inch per side) covers thicker LDPE hardware bags and pleated gussets. Vertically, a 2.0 to 2.5 inch folded height gives room for a 3/8 inch double-ply top hang bridge, a die-cut Euro sombrero or round peg hole, front branding, and a 1/2 inch bottom staple or tape strip. CubitPack prints custom sizes from 250 header cards in 10–14 business days with zero die fees and free US shipping.

How much wider should a fold-over header card be than my poly or cello bag?

Flexible clear bags are extruded and heat-slit with wider dimensional variance than die-cut paperboard. A nominally 4.00-inch wide polyethylene bag often measures 4.06 inches across its side weld seams or bows outward once filled with cookies, nuts, cables or collectible figures. When ordering fold-over retail bag toppers for pegboard merchandising, match your width allowance to the bag film

  1. Crisp flat BOPP cellophane bags (+1/8 in / +0.125 in total width): Biaxially oriented polypropylene bags used for custom sticker packs, trading cards, enamel pins and flat confections hold sharp, thin side edges. Pair a 3.875 in bag with a 4.00 in header card, or pair a standard 4.00 in cello bag with a 4.125 in custom topper.
  2. Thick 2 mil to 6 mil LDPE poly bags (+1/4 in / +0.25 in total width): Soft low-density polyethylene bags used for fasteners, O-rings, fishing tackle and auto parts stretch slightly at the mouth when stapled. Pair a 4.00 in poly bag with a 4.25 in header card so clear corner ears never protrude.
  3. Bulky contents that pull the bag mouth inward: When chunky items like dog biscuits, pretzels or coiled cables pull the front and back bag walls apart, flatten the sealed top 1 inch of the filled bag with a ruler and measure that actual flattened mouth width before adding your 1/8 to 1/4 inch overhang.
  4. Wrap-around textile riders without a bag (-1/8 in snug pinch): When folding a cardstock rider directly over bundled custom sock boxes alternatives such as crew socks, gloves or microfiber cloths, size the card width equal to or 1/8 inch narrower than the folded textile stack so the garment edges frame the card cleanly.

What are the standard folded and flat header card sizes for 3-inch to 8-inch retail bags?

Because CubitPack includes custom cutting dies free on every order, you can specify exact fractional widths (such as 4.125 × 2 in or 5.25 × 2.5 in) to match existing stock bags, or choose standard bag widths that fit common topper dimensions. Remember that quotes in our cards form ask for flat unfolded sheet width × height - a symmetrical 4 × 2 in folded topper is entered as 4 × 4 in flat. Compare these eight retail bag-topper tiers alongside custom flat pouches

Folded topper (W × H)Flat open sheet (W × H)Target bag flat widthHang cutout & typical bagged items
3.0 × 1.5 in3.0 × 3.0 in2.75 – 2.875 in BOPP1/4 in round hole · Enamel pins, charms, jewelry findings, beads
3.5 × 1.75 in3.5 × 3.5 in3.25 – 3.375 in bag5/16 in round hole · Lip balms, keychains, micro electronic parts
4.0 × 2.0 in4.0 × 4.0 in3.75 – 3.875 in BOPPEuro sombrero slot · Sticker packs, trading cards, gummies, lures
4.25 × 2.0 in4.25 × 4.0 in4.00 in standard polyEuro sombrero slot · 4-inch stock poly bags of screws, toys, treats
4.5 × 2.25 in4.5 × 4.5 in4.25 – 4.375 in bagEuro sombrero slot · Blind-bag figures, iced cookies, wax melts
5.25 × 2.5 in5.25 × 5.0 in5.00 in standard bagEuro sombrero slot · Pretzels, beef jerky, pet chews, hair clips
6.25 × 2.5 in6.25 × 5.0 in6.00 in gusseted bagEuro sombrero slot · Building block kits, craft sets, trail mix
8.0 × 3.0 in8.0 × 6.0 in7.50 – 7.75 in bundleReinforced sombrero · Multi-pair socks, work gloves, gasket kits
Side-by-side crisp BOPP cello sticker bag and thick LDPE hardware poly bag sealed with custom header cards

Save this size chart

Every size on this page on one sheet. Pin it for later.

How tall should each folded flap be to fit a Euro sombrero slot or round peg hole?

Buyers often try to squeeze a logo, product title, net weight and Euro hang hole onto a tiny 1.25-inch folded flap, leaving almost no paperboard above the peg cutout or below the text for staples. Review our companion 2-sided fold-over header card dieline and Euro slot guide and budget vertical height from top crease down to bottom edge

  1. 1.5-inch folded height (3.0 in flat): Fits narrow 3-inch toppers using a 0.25 in round peg hole. Budgets 0.3125 in top bridge + 0.25 in hole + 0.55 in compact logo zone + 0.3875 in bottom seal strip.
  2. 2.0-inch folded height (4.0 in flat): The workhorse retail standard for 4-inch to 5-inch bags with a Euro sombrero slot. Budgets 0.375 in double-ply top bridge + 0.375 in sombrero slot height + 0.75 in high-impact brand and SKU band + 0.50 in bottom staple or adhesive tape strip.
  3. 2.5-inch to 3.0-inch folded height (5.0 to 6.0 in flat): Recommended for 5-inch to 8-inch bags weighing 6 to 16 oz, bilingual product titles, FDA nutrition panels on the rear flap, or contoured scalloped bottom edges.
  4. When a folding carton beats a tall topper: If your product weighs over 16 oz or needs crush protection inside custom display boxes, step up to one-piece custom header card boxes.
Side-gusseted gourmet cello snack bag and extended-lip pet treat header card showing clean fold crimps

Know your size? Compare pricing across up to 3 quantities.

Request a Quote →

How do side-gusseted snack bags and extended back lips change bag topper dimensions?

Two specialized assembly styles alter standard symmetrical flat-sheet math - pleated side-gusset cellophane bags used in bakeries and candy shops, and asymmetric extended-back-lip toppers used on high-speed kitting tables. Compare closure mechanics in stapled vs adhesive tape fold-over header cards and check Paperboard thickness equivalents in our paperboard thickness converter

  1. Side-gusseted cello bags (for example 4 × 2 × 9 in): A 4-inch wide gusseted bag has 2-inch pleated side walls that fold inward at the top crimp, creating four layers of stiff film at each upper corner. Add a full +1/4 inch (4.25 in topper width) and crimp the gusset pleats flat before stapling or taping.
  2. Asymmetric extended back lip (+0.25 to +0.375 in on rear flap): Instead of scoring a 4.0 × 4.0 in sheet down the exact 2.0 in center, we score a 4.0 × 4.25 in sheet at 2.0 in (front) and 2.25 in (back). Packers push the bag mouth against the protruding 1/4-inch rear lip as a mechanical stop, cutting hand-packing time per bag.
  3. Barcode and lot-code placement on the rear flap: Keep your GS1 UPC-A barcode (at least 1.15 × 0.65 in including white quiet zones) in the middle of the rear flap, at least 0.50 in above the bottom edge so wire staples or bag tape never cross the bars.

How fast can I order custom-sized header cards from 250 units with zero die charges?

Stock craft-store bag toppers lock you into plain kraft squares that rarely match commercial 3.75 in, 4.00 in or 5.00 in poly bags. Ordering custom printed poly-bag header cards from CubitPack gives you exact structural fit without tooling penalties

  1. Exact fractional widths with zero die or plate charges: Whether you need 3.875 × 1.75 in, 4.25 × 2.0 in with an extended back lip, or a scalloped die-cut arch with a Euro sombrero slot, cutting dies and plates are included free.
  2. Low 250-card standalone minimum and multi-SKU ganging: Start at 250 header cards (or match a paired custom box order), and split 2 or 3+ SKU artworks across one shared card size to unlock 1,000, 2,500 and 5,000+ volume breaks.
  3. Free 2D proof, 3D mockup and 10–14 business day delivery: Get a quote reply in 5–7 minutes (24/7), verify your flat dieline and 3D folded mockup before payment, and receive free shipping across all 50 US states in 10–14 business days (4–5 business day rush available, extra cost quoted).

What are the five most common bag topper sizing mistakes?

Double-check these five dimension rules before approving your header card dieline

  1. Ordering a 4.00 in wide header card for a 4.00 in nominal LDPE poly bag instead of 4.25 in, leaving clear plastic corners sticking out on pegboards.
  2. Entering folded height instead of flat unfolded height without noting which is which (a 4 × 2 in folded topper uses a 4 × 4 in flat sheet).
  3. Specifying a 1.25 in folded flap height with a Euro sombrero slot, leaving too little top cardstock bridge and tearing on retail hooks.
  4. Measuring an empty flat bag instead of a filled, sealed sample bag whose chunky contents pull or bow the upper seam.
  5. Forgetting to add 1/4 in width clearance for pleated four-layer corners on side-gusseted bakery and candy cello bags.

Packaging for this

Ready to order header cards? Compare up to 3 quantities with a free 3D mockup.

Request a Quote →
FAQ

Questions about header cards

What size header card fits a standard 4-inch wide cello or poly bag?

For a crisp 4.00-inch wide BOPP cellophane bag, order a 4.125 × 2.0 inch folded header card (4.125 × 4.0 in flat). For a thicker 4.00-inch LDPE poly bag or side-gusseted snack bag, order a 4.25 × 2.0 inch folded header card (4.25 × 4.0 in flat) so bag edges stay tucked inside.

Should I enter the folded size or flat open size in the quote form?

Enter the flat open sheet width × height in Step 1 (for example, 4.25 × 4.0 in for a 4.25 × 2.0 in folded bag topper) and select Folded card in Step 2, or note your desired folded size in the project notes and our designers will build the exact pre-scored dieline.

What is the minimum folded flap height for a Euro sombrero hang slot?

Plan at least 2.0 inches of folded flap height (4.0 inches flat height) when adding a standard 1.25 × 0.375 inch Euro sombrero slot. That gives a tear-resistant 0.375 inch double-ply bridge above the slot, 0.75 inch for your logo, and 0.50 inch at the bottom for staples or tape.

How does an extended back lip affect flat header card height?

Adding a 0.25-inch extended back lip increases only the rear flap height so packers can slide bags against the back edge rapidly. For example, a 4.25 × 2.0 in front flap paired with a 2.25 in rear flap uses a 4.25 × 4.25 in flat sheet scored off-center at 2.0 inches.

Do custom fractional bag topper widths cost extra for cutting dies?

No. CubitPack never charges cutting-die or printing plate fees on custom header cards. Ordering an exact fractional 4.125 × 2.0 in or 5.25 × 2.5 in bag topper with a registered two-ply Euro sombrero hang hole carries zero tooling surcharge from 250 units upward.

Can I use one header card size across multiple bag lengths?

Yes. Because a fold-over header card only crimps the top mouth of the bag, a single 4.25 × 2.0 inch topper fits 4 × 5 in, 4 × 6 in and 4 × 8 in poly bags alike, letting you gang multiple SKUs inside one print run.

Still have a question? Ask a packaging specialist.

Request a Quote →

Request your header cards quote

Tell us your size and quantities, and one dedicated account manager prepares pricing for each tier.

  • Free design & AI-to-print studio + 3D mockup
  • No die or plate charges · 4–5 day rush available
  • Free shipping to all 50 states
  • 10% off your first order
Written byCubitPack Editorial StudioPackaging & Prepress Specialist

Our packaging specialists help US brands size, structure, and print custom boxes, labels, and bags, checking dielines, board weights, and Pantone or CMYK artwork before every production run.

How we made this guide

We verified BOPP cellophane and LDPE poly-bag seam tolerances, grain-parallel crease allowances, GS1 UPC-A barcode quiet zones, and Euro sombrero hang-bridge clearances against TAPPI paperboard methods and GS1 retail standards. A packaging specialist checked every dimension row. Spot an error? Tell us and we will fix it.

Reviewed by CubitPack Prepress & Structural Studio, packaging specialist at CubitPackPublished November 16, 2026Updated November 16, 2026Next review February 14, 2027
Sources
  1. Paperboard caliper thickness, grain-parallel crease scoring and two-ply hang-bridge tear resistance.
  2. Minimum UPC-A barcode dimensions, quiet zones, and rear-flap placement clear of bottom seal strips.
  3. Peg-hook load suspension guidelines and bagged merchandise weight thresholds.
What changed
  • November 16, 2026: First published with 8-tier folded and flat bag-topper size chart, +1/8 in BOPP vs +1/4 in LDPE overhang rules, vertical flap stack-up math, and extended-lip guide.
SharePinterestLinkedIn
Helpful?

More guides

New packaging guides by email

Sizes, materials and design tips. Unsubscribe anytime.